 |
CLICK IMAGE TO ENLARGE
JOHN DEERE RADIATOR TANK FROM A JOHN DEERE 60 WITHOUT POWER STEERING. |
||||
|---|---|---|---|---|
| CASTING #: A4956R. | ||||
| CLICK IMAGES TO ENLARGE | ||||
 |
 |
 |
 |
 |
ASKING $245.00 |
||||
 |
R63093 FILTER BOWL. WILL FIT: 5010, 5020 (S.N. -024,999), 4000 AND 4020 (S.N. 201,000), 2520, 5020 (S.N. 025,000), 4030, 4230, 4430, 4630, 8430, 8630, 4040, 4240, 4440, 4640, 4840, 4050, 4250, 4450, 4650, 4850, 4055, 4255, 4455, 4555, 4755, 4955, 4560, 4760, 4960, 4040, 4240, 4440 | $85.00 |
 |
R58652 FILTER BOWL. WILL FIT: 4000 & 4020 (S.N. 201,000), 2520, 4030, 4230, 4430, 4630, 4040, 4240, 4440, 4640, 4840, 4050, 4250, 4450, 4650, 4850, 4055, 4255, 4455, 4555, 4755, 4955, 4560, 4760 & 4960 | $85.00 |
 |
450 B JOHN DEERE DOZER FINAL DRIVE PAN T32007 | $85.00 |
  |
450 B JOHN DEERE DOZER FINAL DRIVE COVER T32005 | $55.00 |
 |
JD R FAN SHAFT WITH BEVEL GEAR AND PULLEY # R208R AND R1140R | $175.00 |
| CASE POWER SHIFT PARTS - POSSIBLY FROM A 2594 OR A 3594: RING GEAR DRUM #51411 STAMPED IN IT SUN GEAR REACTION C1 CLUTCH |
$$ CALL FOR PRICING $$ |
 |
R.S. ROCKSHAFT COVER | $75.00 |
 |
2010 DASH COVER W/INSTRUCTION PLATE | $60.00 |
 |
PLATFORM EXTENSIONS | $60.00 PAIR |
 |
STEP | $12.00 |
 |
T30277 SWAY BLOCK | $40.00 |
 |
T21464 SWAY BLOCK | $40.00 |
 |
R33863 L.S. SWAY BLOCK | $50.00 |
 |
R54472, R33862 R.S. SWAY BLOCK | $50.00 |
 |
R27559 1000 RPM PTO STUB 3010, 4010 | $85.00 |
 |
(2) Stationary cab glass - part # R186465. Includes frame isolator part #RE51363. Fits John Deere Tractor models 7600, 7700, 7800, 7200, 7400, 7210, 7410,7510, 7610, 7710, 7810. | $200.00 EACH |
 |
4010 John Deere Counter shaft gear Casting number R26062R | $75.00 |
 |
John Deere Hydraulic pump electric de-stroke solenoid valve kit for a non-serial plate john deere hydraulic pump.
This unit will De-stroke your main hydraulic pump while engine is turning over and enable the engine to turn
faster and start better. It kicks the pump out so it is not pumping and causing drag on the starter. part # RE40463 **SEE BELOW FOR COMPATIBLE MODELS** | $375.00 |
| **John Deere Hydraulic pump electric de-stroke solenoid valve kit will fit the following models: 4010, 5010, 3020 (S.N. 122,999), 4020 (S.N. 200,999), 2510, JD300, JD400, 5020 (S.N. 024,999), 4520, 3020, 4000, 4020 (S.N. 201,000), JD500, 2520, 5020 (S. N. 025,000), JD310, 4320, 4620, 7020, 500C, 510, JD401, 2030, 6030, 7520, 4030, 4430, 4630, 2630, 401C, 8430, 8630, 762, 2440 (S.N. -340999), 2640 (S.N. 340,999), 740A, 2440 (S.N. 341,000), 2640 (S.N. 341,000), 2940, 644C,762A, 8850, 8450, 401D, 4040, 4240, 4440, 4640, 4840, 4050, 4250, 4450, 4250, 4450, 8440, 8640 Radial piston pumps, 762B, 4055, 4255, 4555, 4755, 4955, 4560, 4960, 2840, 2350, 2550, 2750, 2950, 31, 2955, 2755, 2355, 2555, 2155, 2355, 3155, 3055, 3255 | ||
 |
Hydraulic multi-plier with 4 pioneer female couplers | $350.00 |
 |
wiring harness. late 20 series row crop with dimmer light switch socket. AR43986, AR43987, RE42183, RE41282, AR5517 | $70.00 |
 |
1000 RPM PTO drive shaft T30803 | $100.00 |
 |
540 RPM PTO drive shaft AT29707 | $100.00 |
 
|
Magneto Cores - International Harvester H4, a Wico H190885 and a Wico Model B, S.N. XD005638 Spec. XB4001 | $30.00 |
 |
Transmission filter bowl R39796 | $45.00 |
 |
Timing Gear Plate - John Deere Utility Tractor R79863 | $90.00 |
 |
Timing Gear R41275 John Deere Utility Tractor | $40.00 |
 |
Camshaft and Gear- John Deere Utility Tractor T20013T new number R82820 | $150.00 |
|
John Deere weight bracket fits 10, 20 or 30 series John Deere Tractor | $150.00 |
 |
John Deere loader frame bracket. We believe it is part # W19446. It is the bracket that bolts to the front of the tractor and then two loader frames bolt onto it | $85.00 |
 |
John Deere side frames. They are 25.5 inches long and 5 inches tall. 24" from center of mount hole to center of mount hole. They have 2 holes on each end to bolt to the tractor and also several holes in the middle to mount attachments. | $165.00 PAIR |
 |
R107823 L.H. armrest Marked R58816 | $30.00 |
 |
R64564 Splined coupling hub | $140.00 |
 |
R41039 Clutch pistons and springs Marked R33186R we have 2 | $40.00 EACH |
 |
T30803 1000 RPM PTO shaft Fits John Deere Utility tractors. Genuine John Deere not aftermarket 21 splines | $100.00 |
 |
AR26701 PTO cover | $35.00 |
 |
Ford or Ferguson PTO Pulleys, one is metal and the other is a paper pulley | $95.00 EACH |
 |
John Deere chopper wheel spacer for a pull type chopper | $40.00 |
 |
John Deere starter weight brackets Casting number R43130 | $200.00 FOR THE PAIR |
 |
John Deere Slab weights Casting Number R27643 | $85.00 EACH |
 |
John Deere front weight brackets and starter weight. Weight frames part
number AR46289 and the starter weight has a number of 44350 For the starter weight only | $200.00 $100.00 |
 |
John Deere 4020 L.S. shield | $50.00 |
 |
John Deere M and MT pulley assembly | $390.00 |
 |
John Deere 420 third arms | $300.00 |
 |
John Deere centerlinks from various 20, 30, and 40 series tractors | $225.00 EACH |
 |
John Deere front brackets casting number R53614 they will fit a 4030, 4230, 4630, 4040, 4240, 4440, 4455, and other similar models | $150.00 |
 |
John Deere loader frames for a 48 loader | $300.00 |
 |
John Deere rear wheel castings that will fit 4000, 4020, and other models of the same casting number as R34680 | $350.00 PAIR |
 |
John Deere cowl cover from a John Deere 2010 | $75.00 |
 |
John Deere front weight brackets and weight. 4 weight frames and 1 weight bracket for a 4000,
4020 and other similar models. the 4 weight frames have a John Deere # of AR4689 and the front weight
bracket has a number of 44350. Weight Frames Weight Bracket | $100.00 EACH $100.00 |
 |
Ford tractor Front bumper $200.00 It iwill fit 2000, 3000, 2600, 3600, 4100 and any other model with similar front axle | $200.00 |
 |
John Deere Cab Door, Fits 30, 40, and 50 series tractors with factory cabs. JD part # was AR73256 and the new JD part # is AR103636 |
$275.00 |
 |
John Deere Combine belts, the first is a platform and corn head middle variable belt for 4400, 6600, 7700 and 4420 Part # P46553 |
$75.00 |
 |
Cutter bar drive belt for 900 and 200 series cutting platform it has a part number of P40278 and the new JD part number is H136963 |
$40.00 |
 |
John Deere combine feeder house chain we believe it will fit a 4420 or 4400 combine. Part #'s are AH123532 and AH123533 |
$375.00 |
 |
Pair of side frames. they are off of a 3 cylinder model. Part #'s T21653 and T21654 one is Genuine John deere and the other one is hand made |
$125.00 |
 |
John Deere Loader parking stand. This stand will fit a 145 loader and many other similar models |
$150.00 |
 |
FORD 4000 SERIES REAR AXLE LEFT SIDE PART# C5NN4013E REAR HOUSING PART# C5NN4024Y |
$200.00 $200.00 |
 |
30 & 40 SERIES OPEN ROW CROP TRACTORS PART#'S AR62275 & AR62776 | $650.00 FOR THE PAIR |
 |
WITH AXLE MOUNTING BRACKET. | $225.00 |
 |
$150.00 | |
 |
$50.00 |
CLICK IMAGE TO ENLARGE
 
|
Electric hitch control box Marked John Deere part # RE55228A Motorola part # 7EHH2JD06 New John Deere part # RE319298 |
$325.00 |
CLICK IMAGE TO ENLARGE
 |
6 CONNECTING RODS JD PART# AR93341 RODS ARE MARKED #R71074 WILL FIT 4850, 4650, 8430, 8450, 8650, 4040, 4240, 4440, 4640, 4840, AND MANY OTHER TRACTORS AND EQUIPTMENT USING THE 466 ENGINE |
$50.00 EACH |  |
5 CONNECTING RODS JD PART#'S AR70912, AR86980, & SE500080 RODS ARE MARKED #R41423 WILL FIT 4320, 4520, 4430, 4620, 4630, AND MANY OTHER LARGE FRAME TRACTORS | $50.00 EACH |  |
4 CONNECTING RODS JD PART#'S AR63023 RODS ARE MARKED #R54617 WILL FIT 2630, 2640, AND MANY OTHER JD UTILITY TRACTORS | $50.00 EACH |
 |
John deere 2630 or 2640 crank shaft marked R54501 mains & rods @.010 | $475.00 ea |
 |
Mower drive line assembly. It is 540 rpm on both ends.Has compressed length of roughly 31 inches and an extended length roughly 38 inches and is off of a 6 ft mower |
$90.00 |
JOHN DEERE UTILITY TRACTOR DUAL STAGE CLUTCH USED TAKE OUT | ||
| FITS 1530 2020 2030 2040 2240 & OTHER MODELS. PART # AL55140 & AL67525 | $175.00 | |
| INTERNATIONAL HARVESTER FORWARD AND REVERSE CLUTCH ASSEMBLY PARTS. WE HAVE SHAFT, HOUSING,BEARINGS & MISC SPARE PARTS FOR THIS UNIT. WE BELEIVE IT IS FROM A 3616. IND. IH OR A 460-544-656 AG TRACTOR | $175.00 FOR ALL OR WILL SELL BY PIECE |
PARTING OUT A 1972 D5 LGP CAT DOZER
COMPLETE ENGINE$2500.00 PAIR OF TRACKS WITH IDLERS$2500.00 HYDRAULIC CYLINDERS$750.00 EA TRANSMISSION$2000.00 ROPS WITH SWEEPS$1500.00 11.5 BLADE$1500.00 MANY OTHER MISSCELLANEOUS PARTS AVAILABLE, ALL PRICES O.B.O
| $950.00 |
 |
Precision pulley and idlers. They are PPI brand and have a part # of C5-20TE-245B they are 20 degree troughing equal idlers. | $75.00 each. |
 |
We also have one 35 degree new idler, it has a part # of C5-35E-36 | $90.00 |
 |
Conveyor head pulley. the belt position is 20 inches x 30 inches in diameter. It has a 27/16 shaft and the shaft is 4 ft long. It is also equipped with greasable dodge bearings |
$275.00 |
 |
Heavy Duty Muffler; Inlet length 3.5; Inlet I.D. 3.5; Shell length 30 inches; Outlet length 3.5; outlet O.D. 3.75; O.A. length 37 inches | $50.00 |
 |
Mud Clogs for rear tractor tires. They were on a 165 Massey tractor and will fit a tractor with similar tires | $185.00 |
 |
Tractor Rear view mirror. New universal mount rear view mirror. 9wx13t. The mount is extendable and breaks away if impacted | $125.00 |
 |
Waterpump and Briggs engine. The water pump is model BSG-5 and it is a type A | $45.00 |
 |
Vintage tractor fenders. These could be made to fit a vintage Case tractor or other vintage tractor. Hand made with new iron | $175.00 |
 |
Ford 401 Diesel exhaust manifold | $45.00 |
 |
Chrysler hub caps. They are off of 16 inch rims from a Dodge Ram 250 | $40.00 |